Reventec becomes Carbon Neutral Reventec becomes Carbon Neutral Reventec has been certified as a carbon neutral company. Over the past few months our team has been working on our plan to measure, reduce and offset our carbon footprint. We have been collecting our emissions data for analysis and collaborating with Carbon Neutral Britain™ to devise…
Reventec unveils 3 new products at the DSEI Show Reventec unveils 3 new products at the DSEI Show 13 September 2023, Wiltshire, UK: Reventec, an industry-leading vehicle health sensor manufacturer, unveils 3 new products at the Defence and Security Equipment International Show (DSEI – stand H2-712). Visitors to the stand will see the newly launched…
Reventec set to make DSEI debut Reventec set to make DSEI debut Reventec will be exhibiting at the Defence and Security Equipment International Show (London, UK, 12-15 September 2023 – stand H2-712), a major defence supply chain event in London, UK, and will showcase a variety of vehicle health and performance sensors. Accompanying their existing…
Reventec receives JOSCAR Accreditation Reventec receives JOSCAR Accreditation Reventec is pleased to announce their accreditation as a JOSCAR registered supplier. Compliance with JOSCAR, the Joint Supply Chain Accreditation Register, signifies Reventec’s commitment to meet the high standards customers expect in the aerospace, defence and security sectors. The JOSCAR accreditation mark is valued by some of…
Reventec Ltd, a UK-based sensor design and manufacturing company, has developed a fuel level sensor with custom fittings for an Aston Martin DB2 Lightweight race car. Originally built for the 1951 racing season, the DB2 Lightweight was a purpose-built racing variant of the standard production DB2. Designed with the Le Mans 24 Hour race in…
Reventec is a UK-based mechanical and electronic design consultancy specialising in the design and development of technologically advanced products within motorsport. Neville Meech, Managing Director, talks about the company’s new low-cost, EcoSense solid-state liquid level sensor range and introduces a 360° TMR rotary position sensor.
Reventec Ltd, a UK-based mechanical and electronic design consultancy, has developed an oil level sensor for Gibson Technology’s new LMP2 (Le Mans Prototype) race car engine. First Batch of GK428 Engines being delivered for testing back in August 2016- Image Courtesy of Gibson Technology The LMP2 class of the FIA World Endurance Championship allows independent…
Image courtesy of Dragonspeed Reventec Ltd, a UK-based mechanical and electronic design consultancy, has developed a sensor for the International Motor Sports Association (IMSA) that will ensure fairer and more consistent refuelling practices during pit stops. A recent Balance of Performance (BoP) mandate, introduced by IMSA to balance refuelling times among cars with different fuel…
Reventec Ltd, a UK-based mechanical and electronic design consultancy, has developed a low-cost solid-state capacitive liquid level sensor capable of continuous level measurement across all common liquid types. The New EcoSense with 5 bolt SAE flange configuration. The EcoSense liquid level sensor has been developed to address the need for a reliable, low-cost solution to…
Sentronics™ Limited’s latest FlowSonic® Elite HT ultrasonic fuel flow sensor has been homologated for use in the LMP1 class of the FIA World Endurance Championship. The new model increases the upper temperature limit from the original FIA specification of 85°C to 120°C. The original FlowSonic range was created for the fuel flow control regulations introduced…
Reventec’s sister company Sentronics Limited announce FIA homologation of new fuel flow sensor. FlowSonic Elite 2.2kHz Measurement Rate Sentronics Limited has been granted homologation by the Fédération Internationale de l’Automobile (FIA) for its FlowSonic Elite ultrasonic fuel flow sensor, making it eligible for racing use by competitors in the FIA Formula 1 World Championship and…
Reventec Ltd, the company behind one of the most advanced magnetic sensing technologies used in Formula 1 has won the coveted “2014 Most Innovative New Motorsport Product Award” by Race Tech International, with the judges noting its combination of precision and miniaturisation. “It truly is a great honour to win such an accolade, it’s been…
Reventec Ltd, a specialist mechanical and electronic product development consultancy, has developed a new non-contact linear position sensor capable of accurately sensing through a variety of solid materials. The AD-015 linear position sensor was originally developed in response to a long-travel motorsport suspension monitoring requirement; however the versatile technology is already proving essential for a…
Salisbury, UK, 1st August 2013 – Former Lead Motorsport Design Engineer at Gill Sensors, Neville Meech, has founded a new UK-based design and engineering consultancy, offering technical design solutions and consultancy services to top-level race teams and automotive organisations. With over 12 years’ experience working closely with engineers within Formula 1®, LMS/ALMS, WEC and IndyCar,…
